SunCool 2

CHF 34.50 exkl. MwSt.

* IMPORTANT: Product is delivered without helmet *


  • The product consists of a faceplate with neck protection that is attached to an industrial safety helmet.
  • This shade the face, ears and neck in order to reduce the effect on the skin of sun-induced UV light when working outdoors.
  • The forehead cover and the neck protection were made to ensure the highest possible UV protection for the skin (UPF 50+).
The "SunCool" model can basically be combined with all common industrial safety helmets with and without a faceplate (for example with the UVEX Pheos series, the MSA V-gard series, the ARTILUX Montana and Eurocap series or the Germatex Kara series). The "SunCool" model is not compatible with industrial safety helmets that have a continuous brim around the entire helmet. If the neck protector cannot be held in position after putting it on the industrial safety helmet, if there are chicks or if the field of vision is significantly restricted, the "SunCool" model from Sunity is not suitable for this industrial safety helmet.
Le modèle «SunCool» peut en principe être combiné avec tous les casques de sécurité industriels courants avec et sans plaque frontale (par exemple avec la série UVEX Pheos, la série MSA V-gard, la série ARTILUX Montana et Eurocap ou la série Germatex Kara). Le modèle "SunCool" n'est pas compatible avec les casques de sécurité industriels qui ont un bord continu autour du casque entier. Si le protège-nuque ne peut pas être maintenu en position après l'avoir mis sur le casque de sécurité industrielle, s'il y a des poussins ou si le champ de vision est considérablement restreint, alors le modèle "SunCool" de Sunity ne convient pas pour ce casque de sécurité industriel.

The forehead cover with neck protection should be stored at a temperature of + 5 ° C to + 40 ° C, dry and valued by the sun.

Cleaning, maintenance and service life:

The faceplate with neck protection can be washed at 30 ° C without fabric softener. To ensure that the front cover with neck protection provides the longest possible protection, the front cover must be checked for damage, cracks and deep scratches. The fabric of the neck protection, on the other hand, must be checked for holes, tears and wear. In the event of damage, the protection of the faceplate and neck protection is no longer guaranteed and the product must be replaced.


In order to ensure optimal protection, the forehead cover with neck protection must be applied to the helmet without any gaps so that the neck and face are optimally shaded. Although the forehead cover and neck protection weaken the UV radiation from the sun, absolute UV protection cannot be guaranteed. It is recommended that you also apply sunscreen to all exposed skin areas. You must not look directly into the sun through the faceplate-


There are no reviews yet.

Be the first to review “SunCool 2”

Your email address will not be published. Required fields are marked *